localhost wiki
General update notes on FreeBSD:
It is common to start daemon in /etc/rc.conf nowadays by putty say:
sshd_enable=YES
into the config. (That is the new rcNG scipting) More and more ports adopt that nomenclature. So even if you install or upgrade something put it into the rc.conf if it is to be started automatically. This will prevent failures once the port adopts to such system.
Apache:
To upgrade apache 1.3.x from ports in the ION Way:
mkdir -p /home/bup/update/apache13 tar cfvpj /home/bup/update/apache13/apache-date +%d%m%y.tbz /home/apache tar cfvpj /home/bup/update/apache13/apache-etc-date +%d%m%y.tbz /usr/local/etc/apache/ Check /etc/make.conf for:
APACHE_DATADIR=/home/apache APACHE_DOCUMENT_ROOT=/home/apache/hosts/ion.lu/$HOSTNAME
portupgrade -Rri apache
A quick clean-up: cd /home/apache ; ln -s /usr/local/etc etc ; ln -s /usr/local/etc/apache/ conf ; ln -s /usr/local/libexec libexec ; mkdir logs ; rm -rvf proxy
Tada done!
php* after having upped apache just upgrade all the php* stuff
Apache13 to Apache13-modssl:
Tricky one you need to redo all the php* stuff aswell...
Deinstall apache13 reinstall apache13-modssl
cd /usr/ports/www/apache13 && make deinstall cd /usr/ports/www/apache13-modssl && make WITH_APACHE_MODACCEL=yes WITH_APACHE_MODDEFLATE=yes WITH_APACHE_PERF_TUNING=no reinstall
for MODACCEL you need some specific config. uncomment: mod_freeze and mod_ranban
cd /usr/ports/lang/php5 && make deinstall && make reinstall some php5* modules might need update: portupgrade -fi php5-\* pecl-pdflib mod_dav
Sometimes you hit the problem that mod_php is installed and you require CMD-Line php or pear, do this:
cd /usr/ports/www/mod_php5 (or 4) make deinstall cd /usr/ports/lang/php5 (or 4) make install That port will install a mod_php and command line php.
======================================================================================================================
Upping qmail-scanner-queue.sh:
Files to be aware of: /var/qmail/bin/qmail-scanner-queue.sh /var/spool/qmailscan/
bup: mv /var/qmail/bin/qmail-scanner-queue.pl /var/qmail/bin/qmail-scanner-queue.pl-date +%d%m%y cd /var/spool && mv qmailscan qmailscan-date +%d%m%y cd ~software/unpacked && mv qmail-scanner-1.24 qmail-scanner-1.24-date +%d%m%y
cd ~software/archives && wget http://dl.sourceforge.net/sourceforge/qms-analog/qms-analog-0.4.4.tar.gz cd ~software/archives && wget http://dl.sourceforge.net/sourceforge/qmail-scanner/qmail-scanner-1.25.tgz cd ~software/unpacked && tar xfvz ../archives/qms-analog-0.4.4.tar.gz && tar xfvz ../archives/qmail-scanner-1.25.tgz
- cd qms-analog-0.4.4/ gmake all cp qmail-scanner-1.25-st-qms-20050618.patch ../qmail-scanner-1.25/ cd ../qmail-scanner-1.25/
patch -p1 < qmail-scanner-1.25-st-qms-20050618.patch diff -u qms-config ../qmail-scanner-1.24-date +%d%m%y/qms-config cp ../qmail-scanner-1.24-date +%d%m%y/qms-config . chmod 755 qms-config
- /qms-config
- /qms-config install
diff -u /var/spool/qmailscan-date +%d%m%y/quarantine-attachments.txt /var/spool/qmailscan/quarantine-attachments.txt |grep -v \# |less cp /var/spool/qmailscan-date +%d%m%y/quarantine-attachments.txt /var/spool/qmailscan/quarantine-attachments.txt vi /var/spool/qmailscan/quarantine-attachments.txt setuidgid qscand /var/qmail/bin/qmail-scanner-queue.pl -z setuidgid qscand /var/qmail/bin/qmail-scanner-queue.pl -g ##chown -R qscand:qscand /var/spool/qmailscan
diff -u /var/qmail/bin/qmail-scanner-queue.pl /var/qmail/bin/qmail-scanner-queue.pl-date +%d%m%y |grep -v \# |less vi /var/qmail/bin/qmail-scanner-queue.pl
sa_alt for sql support!!!
- Alter: $sa_delete='6';
- $spamc_subject="{SPAM?}"; $sa_alt='0';
HURRAY ON 07022005 THIS ACTUALLY WORKED SEAMLESSLY 
ON LINION HURRAY ON 28062005 THIS ACTUALLY WORKED SEAMLESSLY ON REDX
clamav update: ( OLD STUFF cp clamav.conf /home/bup/clamav/clamav.conf-date +%d%m%y CONFIG FILE CHANGE FROM 0.7x to 0.8x clamav.conf -> clamd.conf OLD STUFF ) transferlogtransferlogtransferlogtransferlogtransferlogtransferlogtransferlotransferlogg mkdir -p /home/bup/update/clamav cp -p /usr/local/etc/rc.d/clamav-clamd.sh /home/bup/update/clamav/clamav-clamd.sh-date +%d%m%y cp -p /usr/local/etc/rc.d/clamav-freshclam.sh /home/bup/update/clamav/clamav-freshclam.sh-date +%d%m%y cp -p /usr/local/etc/clamd.conf /home/bup/update/clamav/clamd.conf-date +%d%m%y cp -p /usr/local/etc/freshclam.conf /home/bup/update/clamav/freshclam.conf-date +%d%m%y portupgrade -Rri clamav diff -u /usr/local/etc/rc.d/clamav-clamd.sh /home/bup/update/clamav/clamav-clamd.sh-date +%d%m%y diff -u /usr/local/etc/rc.d/clamav-freshclam.sh /home/bup/update/clamav/clamav-freshclam.sh-date +%d%m%y diff -u /usr/local/etc/clamd.conf /home/bup/update/clamav/clamd.conf-date +%d%m%y nohup clamd 2>&1 | /usr/local/bin/multilog t s100000 n20 /var/log/clamav &
AT THIS POINT IT STILL DOESNT WORK :((( set User=root in clamd.conf
Squirrelmail:
Backup your Squirreldir:
mkdir -p /home/bup/update tar cfvpj /home/bup/update/squirrelmail-date +%d%m%y.tbz /home/apache/hosts/croix-rouge.lu/webmail-lite tar cfvpj /home/bup/update/squirrelmail-date +%d%m%y.tbz /home/apache/hosts/ion.lu/webmail-lite
cd /usr/ports/mail/squirrelmail/ WITH_DATABASE=YES WITH_LDAP=YES SQUIRRELDIR=/home/apache/hosts/ion.lu/webmail-lite make make install clean SQUIRRELDIR=/home/apache/hosts/healthnet.lu/webmail-lite make install php.ini FileUploads=on
An older version of default_pref exists in /var/spool/squirrelmail/pref, you may want to compare it with the one in /home/apache/hosts/ion.lu/webmail-lite/data
If you have problems with SquirrelMail saying "you must login" after you just have, the following php.ini option may help: session.auto_start = 1
In order to do your administrative configuration you need to cd /home/apache/hosts/ion.lu/webmail-lite && ./configure SquirrelMail will not work until this has been done.
Change default version of ruby to 1.8 on i386
pkg_delete portupgrade-\* && cd /usr/ports/sysutils/portupgrade && make install clean
portupgrade -fr lang/ruby16 portupgrade -f lang/ruby18 pkg_deinstall -ri lang/ruby16 ##### This will deinstall ruby 1.6 Stuff handle with care
Change default version of perl to 5.8 on i386
portupgrade -o lang/perl5.8 -f perl-5.6.1_15 portupgrade -f p5-\* ### Will upgrade all p5-* modules
Change default version of X_WINDOW_SYSTEM to xorg on i386 echo X_WINDOW_SYSTEM=xorg >> /etc/make.conf ### IF NOT ALREADY THERE. CHK FIRST pkg_delete -f /var/db/pkg/imake-4* /var/db/pkg/XFree86-* cd /usr/ports/x11/wrapper && make deinstall cd /usr/ports/x11/xorg && make install clean pkgdb -F =======
======================================================================================================================
Usermin:
mkdir -p /home/bup/update tar cfvpj /home/bup/update/usermin-date +%d%m%y.tbz /usr/local/etc/usermin portupgrade -Rri usermin
Virtualmin:
mkdir -p /home/bup/update tar cfvpj /home/bup/update/usermin-date +%d%m%y.tbz /usr/local/etc/webmin/virtual-server portupgrade -Rri virtualmin
Webmin:
mkdir -p /home/bup/update/webmin tar cfvpj /home/bup/update/webmin/webmin-date +%d%m%y.tbz /usr/local/etc/webmin cp -p /usr/local/etc/rc.d/webmin.sh /home/bup/update/webmin portupgrade -Rri webmin
Nagios/-plugins update:
mkdir -p /home/bup/update tar cfvpj /home/bup/update/nagios-date +%d%m%y.tbz /usr/local/etc/nagios tar cfvpj /home/bup/update/nagios-plugins-date +%d%m%y.tbz /usr/local/libexec/nagios portupgrade -Rr nagios
Phpmyadmin:
mkdir -p /home/bup/update/phpMy tar cfvpj /home/bup/update/phpMy/phpMy-date +%d%m%y.tbz /home/apache/hosts/ion.lu/question/phpMy
phpMyAdmin-2.6.1.r1 has been installed into:
- /usr/local/www/phpMyAdmin Please edit config.inc.php to suit your needs. To make phpMyAdmin available through your web site, I suggest that you add the following to httpd.conf:
- Alias /phpmyadmin/ "/usr/local/www/phpMyAdmin/"
cp config.inc.php into new blabla
phpicalendar:
mkdir -p /home/bup/update/phpicalendar tar cfvpj /home/bup/phpicalendar/phpicalendar-date +%d%m%y.tbz /home/apache/hosts/ion.lu/question/phpicalendar
Squid and Dansg upgrade:
mkdir -p /home/bup/update/squid tar cfvpj /home/bup/update/squid/squid-date +%d%m%y.tbz /usr/local/etc/squid cp /usr/local/etc/rc.d/squid.sh /home/bup/update/squid/squid.sh-date +%d%m%y portupgrade -Rri squid
mkdir -p /home/bup/update/dansguardian tar cfvpj /home/bup/update/dansguardian/dansguardian-date +%d%m%y.tbz /usr/local/etc/dansguardian cp /usr/local/etc/rc.d/start-dg.sh /home/bup/update/dansguardian/start-dg.sh-date +%d%m%y FETCH DANSG:
proftpd upgrade:
mkdir -p /home/bup/update/proftpd tar cfvpj /home/bup/update/proftpd/proftpd-date +%d%m%y.tbz /usr/local/etc/proftpd.conf /usr/local/proftpd portupgrade -Rri proftpd
openldap upgrade:
mkdir -p /home/bup/update tar cfvpj /home/bup/update/openldap-date +%d%m%y.tbz /usr/local/etc/openldap tar cfvpj /home/bup/update/openldap-data-date +%d%m%y.tbz /var/db/openldap-data portupgrade -Rri openldap22-client openldap22-server
cfs upgrade:
mkdir -p /home/bup/update/cfs cp -p /usr/local/etc/rc.d/cfsd.sh /home/bup/update/cfs/cfsd.sh-date +%d%m%y portupgrade -Rri cfs diff -u /usr/local/etc/rc.d/cfsd.sh /home/bup/update/cfs/cfsd.sh-date +%d%m%y cp -p /home/bup/update/cfs/cfsd.sh-date +%d%m%y /usr/local/etc/rc.d/cfsd.sh
mount -o port=3049,noinet6 -i -2 localhost:/var/tmp /crypt
pdflib upgrade:
mkdir -p /home/bup/update/pdflib cp /usr/local/share/pdflib/fonts/pdflib.upr /home/bup/update/pdflib/pdflib.upr portupgrade -Rri pdflib diff -u /home/bup/update/pdflib/pdflib.upr /usr/local/share/pdflib/fonts/pdflib.upr echo -n "Smack da enter key " ; read cp /home/bup/update/pdflib/pdflib.upr /usr/local/share/pdflib/fonts/pdflib.upr
amavisd-new update: cp /usr/local/etc/rc.d/amavis* /home/bup/update/ cp /usr/local/etc/amavis* /home/bup/update/
dcc-dccd update:
mkdir -p /home/bup/update/dcc-dccd tar cfvpj /home/bup/update/dcc-dccd/dcc-date +%d%m%y.tbz /usr/local/dcc portupgrade -Rri dcc-dccd
spamass update:
files of interest: /usr/local/etc/rc.d/spamd.sh /usr/local/etc/mail/spamassassin /usr/local/share/doc/
mkdir -p /home/bup/update/spamassassin cp -p /usr/local/etc/rc.d/sa-spamd.sh /home/bup/update/spamassassin/sa-spamd.sh-date +%d%m%y tar cfvpj /home/bup/update/spamassassin/spamassassin-date +%d%m%y.tbz /usr/local/etc/mail portupgrade -Rri p5-Mail-SpamAssassin nohup spamd -x -q -u qscand -r /var/run/spamd/spamd.pid --syslog=stderr 2>&1 | /usr/local/bin/setuidgid qscand /usr/local/bin/multilog t s1000000 n20 /var/log/spamd &
CYRUS 3modules:
cyrus-imapd2 - cyrus-sasl2 - cyrus-sasl2-saslauthd:
mkdir -p /home/bup/update/cyrus cp /usr/local/etc/cyrus.conf /home/bup/update/cyrus/cyrus.conf-date +%d%m%y cp /usr/local/etc/imapd.conf /home/bup/update/cyrus/imapd.conf-date +%d%m%y cp /usr/local/etc/rc.d/imapd.sh /home/bup/update/cyrus/imapd.sh-date +%d%m%y cp /usr/local/etc/rc.d/saslauthd.sh /home/bup/update/cyrus/saslauthd.sh-date +%d%m%y cp /usr/local/etc/sasldb2 /home/bup/update/cyrus/sasldb2-date +%d%m%y cp /usr/local/etc/sasldb2.db /home/bup/update/cyrus/sasldb2.db-date +%d%m%y tar cfvpj /home/bup/update/cyrus/cyrus-date +%d%m%y.tbz /usr/local/cyrus
Upgrade Netatalk:
mkdir -p /home/bup/update tar cfvpj /home/bup/update/NetAtalk-date +%d%m%y.tbz /usr/local/etc/AppleVolumes.default /usr/local/etc/AppleVolumes.system /usr/local/etc/afpd.conf /usr/local/etc/afppasswd /usr/local/etc/atalkd.conf /usr/local/etc/papd.conf cp /usr/local/etc/rc.d/netatalk.sh /home/bup/update portupgrade -Rri net/netatalk
cups update:
mkdir -p /home/bup/update/cups tar cfvpj /home/bup/update/cups/cups-date +%d%m%y.tbz /usr/local/etc/cups cp -p /usr/local/etc/rc.d/cups.sh /home/bup/update/cups/cups.sh-date +%d%m%y cp -p /etc/printcap /home/bup/update/cups/printcap-date +%d%m%y
openssl update openssl.cnf
gnupg update
Maildrop update mkdir -p /home/bup/update/maildrop cp -p /usr/local/etc/maildroprc /home/bup/update/maildrop/maildroprc-date +%d%m%y cp /etc/mailfilter /home/bup/update/maildrop/mailfilter-date +%d%m%y (user file: .mailfilter )
Amavisd-new update
FreeTDS update
Dansguardian. Squid update ...
p5-XML-Parser Problems
some programs fail to recognize perl dependencies correctly including perl5.8 itself do this:
cd /usr/ports/lang/perl5.8 && make deinstall && portupgrade defunct/module Sorted same for p5-XML-Parser problems (make sure perl is ok)
courier-imap: mkdir -p /home/bup/update/courier-imap tar cfvpj /home/bup/update/courier-imap/courier-imap-etc-date +%d%m%y.tbz /usr/local/etc/courier-imap/ tar cfvpj /home/bup/update/courier-imap/libexec-courier-imap-date +%d%m%y.tbz /usr/local/libexec/courier-imap/ tar cfvpj /home/bup/update/courier-imap/courier-rcd-date +%d%m%y.tbz /usr/local/etc/rc.d/courier* /usr/local/etc/rc.d/imap*
courier-authlib: mkdir -p /home/bup/update/courier-authlib tar cfvpj /home/bup/update/courier-authlib/courier-authlib-etc-date +%d%m%y.tbz /usr/local/etc/authlib/ tar cfvpj /home/bup/update/courier-authlib/courier-rcd-date +%d%m%y.tbz /usr/local/etc/rc.d/courier* /usr/local/etc/rc.d/imap* tar cfvpj /home/bup/update/courier-authlib/libexec-courier-authlib-date +%d%m%y.tbz /usr/local/libexec/courier-authlib/ tar cfvpj /home/bup/update/courier-authlib/lib-courier-authlib-date +%d%m%y.tbz /usr/local/lib/courier-authlib/ /usr/local/libexec/courier authlib/
vpopmail: VERY CAREFULL WITH THE OPTIONS (SQL/NON-SQL etc) Do a Backup first:
mkdir -p /home/bup/update/vpopmail tar cfvpj /home/bup/update/vpopmail/vpopmail-date +%d%m%y.bz2 /usr/local/vpopmail tar cfvpj /home/bup/update/vpopmail/vpopmail-bin-date +%d%m%y.bz2 /usr/local/vpopmail-bin cd /usr/ports/mail/vpopmail WITH_QMAIL_EXT=yes make WITH_SINGLE_DOMAIN=YES WITHOUT_ROAMING_USERS=YES WITH_CLEAR_PASSWD=YES WITH_AUTH_LOG=YES WITH_VALIAS=YES WITH_MYSQL=NO WITH_SQL_LOG=NO WITH_DOMAIN_QUOTAS=YES WITHOUT_PASSWD=YES RELAYCLEAR=30 LOGLEVEL=p make
:%s/usr\/local\/www/home\/apache\/hosts\/cartuning.lu\/webmail/g :%s/usr\/local\/www\/horde/home\/apache\/hosts\/ion.lu\/webmail/g
horde update and so on (imp/turba/kronolith/etc...)
horde 3.0.x:
WITH_PHP5=YES make
Information for horde-3.0.4_1:
Install notice: ************************************************************************ Horde has been installed in /usr/local/www/horde with your blank configuration files.
If you want Horde to access a database, you have to run the appropriate scripts located in /usr/local/www/horde/scripts/sql. It is recommended that you change the password of the 'hordemgr' user used to connect to the horde database. Horde is setup by default to access MySQL.
WARNING! if you are upgrading from Horde v. 2.2.x, you have to alter your ******** database schemas. Please read the doc UPGRADING.
You can now access Horde without a password at <http://localhost/horde/>, and you will be logged in as an administrator. You should first configure a real authentication backend. Click on "Setup" in the "Administration" menu and configure Horde. Start in the "Authentication" tab. See the doc in /usr/local/share/doc/horde for details. (tip: if you plan to install IMP, just keep "Automatic authentication as a certain user", add your login to be treated as administrator, and once IMP will be installed, switch to "Let a Horde application handle auth"). Select a log driver; if you keep 'file', do not forget to add a line in /etc/newsyslog.conf. Then select and configure a preferences driver.
Your /usr/local/etc/apache/httpd.conf has been updated, you have to restart Apache.
When everything is OK, you should be able to access Horde from <http://localhost/horde/>. (If <http://localhost/horde/> does not run, but
<http://localhost/horde/index.php> is OK, then you have
to define index.php as a DirectoryIndex in /usr/local/etc/apache/httpd.conf.)
There is a testing script at <http://localhost/horde/test.php>.
- ***********************************************************************
Imp:
linion imp # make WITH_HTML=yes WITH_COURIER-IMAP=yes reinstall ===> Installing for imp-4.0.3 ===> imp-4.0.3 depends on file: /usr/local/share/pear/Auth/SASL.php - found ===> imp-4.0.3 depends on file: /usr/local/www/horde/turba/minisearch.php - not found ===> Verifying reinstall for /usr/local/www/horde/turba/minisearch.php in /usr/ports/mail/turba ===> Installing for turba-2.0.2 ===> turba-2.0.2 depends on file: /usr/local/www/horde/rpc.php - found ===> Generating temporary packing list ===> Documentation installed in /usr/local/share/doc/turba.
************************************************************************ Turba has been installed in /usr/local/www/horde/turba with your blank configuration files.
Horde must be configured; if not, see `pkg_info -D -x horde'.
Then, you might have to tune the configuration files located in /usr/local/www/horde/turba/config/, specially the file sources.php.
Then, you must login to Horde as a Horde Administrator to finish the configuration.
You have to create a table in your database; please see /usr/local/www/horde/turba/scripts/. You might create a LDAP schema: please see the doc LDAP.
WARNING! if you are upgrading from Turba v. 1.2.x, you have to alter your ******** schemas. Please read the doc UPGRADING.
To protect your configuration files, you have to restart Apache. ************************************************************************
===> Registering installation for turba-2.0.2 ===> Returning to build of imp-4.0.3 ===> imp-4.0.3 depends on file: /usr/local/www/horde/ingo/filters.php - not found ===> Verifying reinstall for /usr/local/www/horde/ingo/filters.php in /usr/ports/mail/ingo ===> Extracting for ingo-1.0.1 => Checksum OK for ingo-h3-1.0.1.tar.gz. ===> Patching for ingo-1.0.1 ===> Configuring for ingo-1.0.1 ===> Installing for ingo-1.0.1 ===> ingo-1.0.1 depends on file: /usr/local/www/horde/rpc.php - found ===> ingo-1.0.1 depends on file: /usr/local/include/php/main/php.h - found ===> ingo-1.0.1 depends on file: /usr/local/lib/php/20020429/imap.so - found ===> Generating temporary packing list ===> Documentation installed in /usr/local/share/doc/ingo.
************************************************************************ Ingo has been installed in /usr/local/www/horde/ingo with your blank configuration files.
Horde must be configured; if not, see `pkg_info -D -x horde'.
Finally, you must login to Horde as a Horde Administrator to finish the configuration.
To protect your configuration files, you have to restart Apache. ************************************************************************
===> Registering installation for ingo-1.0.1 ===> Returning to build of imp-4.0.3 ===> imp-4.0.3 depends on file: /usr/local/www/horde/nag/data.php - not found ===> Verifying reinstall for /usr/local/www/horde/nag/data.php in /usr/ports/deskutils/nag ===> Extracting for nag-2.0 => Checksum OK for nag-h3-2.0.tar.gz. ===> Patching for nag-2.0 ===> Configuring for nag-2.0 ===> Installing for nag-2.0 ===> nag-2.0 depends on file: /usr/local/www/horde/rpc.php - found ===> Generating temporary packing list ===> Documentation installed in /usr/local/share/doc/nag.
************************************************************************ Nag has been installed in /usr/local/www/horde/nag with your blank configuration files.
Horde must be configured; if not, see `pkg_info -D -x horde'.
Then, you have to create the table nag_tasks, from the SQL script /usr/local/www/horde/nag/scripts/sql/nag.sql. For example, if your database is MySQL, you may run mysql --user=root --password=yourpass horde < nag.sql
WARNING! if you are upgrading from Nag v. 1.1.x, you have to alter your ******** schemas. Please read the doc /usr/local/share/doc/nag/UPGRADING.
Finally, you must login to Horde as a Horde Administrator to finish the configuration.
To protect your configuration files, you have to restart Apache. ************************************************************************
===> Registering installation for nag-2.0 ===> Returning to build of imp-4.0.3 ===> imp-4.0.3 depends on file: /usr/local/bin/gpg - found ===> imp-4.0.3 depends on file: /usr/local/bin/aspell - found ===> imp-4.0.3 depends on file: /usr/local/share/pear/HTTP/Request.php - found ===> imp-4.0.3 depends on file: /usr/local/include/php/main/php.h - found ===> imp-4.0.3 depends on file: /usr/local/lib/php/20020429/imap.so - found ===> imp-4.0.3 depends on file: /usr/local/bin/deliverquota - found ===> Generating temporary packing list ===> Checking if mail/imp already installed pkg_info: package bsdpan-MailTools-1.62 has no origin recorded pkg_info: package bsdpan-Term-ReadLine-Perl-1.0203 has no origin recorded pkg_info: package bsdpan-TermReadKey-2.21 has no origin recorded pkg_info: package bsdpan-libnet-1.19 has no origin recorded ===> Documentation installed in /usr/local/share/doc/imp.
************************************************************************ IMP has been installed in /usr/local/www/horde/imp with your blank configuration files.
Horde must be configured and the tables created; if not, see `pkg_info -D -x horde'.
Then, you might have to tune the configuration files located in /usr/local/www/horde/imp/config/, specially the file servers.php.
Then, you must login to Horde as a Horde Administrator to finish the configuration. Please read /usr/local/share/doc/imp/INSTALL.
Warning: the filter system of IMP 3.x has been replaced by a separate ******** application => check the port mail/ingo. Ingo provides a script
- to migrate the existing filter rules from IMP 3.x, see Ingo's documentation.
To protect your configuration files, you have to restart Apache.
To secure your installation, it is at least recommended that you change the default database password used by horde and imp. Then, you might change the 'session.save_path' setting in php.ini to a directory only readable and writeable by your webserver. ************************************************************************
===> Registering installation for imp-4.0.3
backup /usr/local/etc/horde and the webroot.
mkdir -p /home/bup/update/horde tar cfvpj /home/bup/update/horde/horde-etc-date +%d%m%y.tbz /usr/local/etc/horde
cclient update just update no config needed
php update: php.ini's Backup
sudo update
qpopper update
wu-ftpd update
powerdns update files to bup: pdns.conf mkdir -p /home/bup/update/powerdns cp -p /usr/local/etc/pdns.conf /home/bup/update/powerdns/
bind update
mysql update:
update all db's
mkdir -p /home/bup/update/sql/
for a in /usr/local/bin/mysqlshow |/usr/bin/cut -f2 -d\| |/usr/bin/grep -v "\-\-\-\-\-\-\-"|/usr/bin/grep -v Databases |/usr/bin/grep -v dblogging; do /usr/local/bin/mysqldump -e -q -a $a > /home/bup/update/sql/$a-UPDATE-date +%d%m%y.sql ; done cd /home/bup/update/sql/ && tar cfvz db-date +%d%m%y.tgz *.sql && rm *.sql cp -p /usr/local/etc/rc.d/mysql-server.sh /home/bup/update/sql/mysql-server-date +%d%m%y.sh /usr/local/etc/rc.d/mysql-server.sh start
now you can safely update
samba update:
mkdir -p /home/bup/update/samba cp -p /usr/local/etc/smb.conf /home/bup/update/samba/smb.conf-date +%d%m%y cp -p /usr/local/etc/recycle.conf /home/bup/update/samba/recycle.conf-date +%d%m%y cp -p /usr/local/etc/rc.d/samba.sh /home/bup/update/samba/samba.sh-date +%d%m%y cp -rp /usr/local/private /home/bup/update/samba/private-date +%d%m%y
phpgroupware update
Backup htdocs and maybe any DAtabases.
moregroupware update
Backup htdocs and maybe any DAtabases.
imap-uw: just update
engmail upgrade:
You have to manually delete the components database (compreg.dat), located in your profile directory in order to use enigmail.
If you upgraded Mozilla/Thunderbird from a previous release you have to remove also the XUL.mfasl file and the content of the chrome subdirectory.
php4-php5 upgrade:
Check what is running on that box and assure youself that the switch will be flawless.
- pkg_delete php4-ctype-4.3.11 php4-domxml-4.3.11 php4-ftp-4.3.11 php4-gd-4.3.11 php4-gettext-4.3.11 php4-iconv-4.3.11 php4-imap-4.3.11 php4-ldap-4.3.11 php4-mbstring-4.3.11 php4-mcal-4.3.11 php4-mcrypt-4.3.11 php4-mhash-4.3.11 php4-mysql-4.3.11 php4-openssl-4.3.11 php4-pcre-4.3.11 php4-pear-4.3.11 php4-session-4.3.11 php4-xml-4.3.11 php4-zlib-4.3.11
mysql40-mysql41:
Not very difficult but you need a DUMP of your database.
mkdir -p /home/bup/update/sql/ mysqldump -e -q -a -A > /home/bup/update/sql/hostname-date +%d%m%y.sql for a in /usr/local/bin/mysqlshow |/usr/bin/cut -f2 -d\| |/usr/bin/grep -v "\-\-\-\-\-\-\-"|/usr/bin/grep -v Databases |/usr/bin/grep -v dblogging; do /usr/local/bin/mysqldump -e -q -a $a > /home/bup/update/sql/$a-UPDATE-date +%d%m%y.sql ; done cd /home/bup/update/sql/ && tar cfvz db-date +%d%m%y.tgz *.sql && rm *.sql cp -p /usr/local/etc/rc.d/mysql-server.sh /home/bup/update/sql/mysql-server-date +%d%m%y.sh
cd /usr/ports/databases/mysql40-server && make deinstall cd /usr/ports/databases/mysql40-client && make deinstall cd /usr/ports/databases/mysql41-server && make install cd /usr/ports/databases/mysql41-client && make install /usr/local/etc/rc.d/mysql-server.sh start
qmailadmin, it's a web-based app (cgi-bin) so only the code needs to be bupped:
mkdir -p /home/bup/update/qmailadmin
tar cfvpj /home/bup/update/qmailadmin/home-apache-cgi-bin-date +%d%m%y.tbz /home/apache/cgi-bin tar cfvpj /home/bup/update/qmailadmin/home-apache-hosts-qmailadmin-date +%d%m%y.tbz /home/apache/hosts/ion.lu/qmailadmin
WITH_HELP=NO WITH_DOMAIN_AUTOFILL=NO WITH_SPAM_DETECTION=NO WITH_MODIFY_QUOTA=NO PREFIX=/home/apache CGIBINDIR=cgi-bin CGIBINSUBDIR= CGIBINURL=/cgi-bin WEBDATADIR=hosts/ion.lu WEBDATASUBDIR=qmailadmin make install
razor-agents: just update...
mrtg update: mkdir -p /home/bup/update/mrtg tar cfvpj /home/bup/update/mrtg/mrtg-date %%d%m%y.tbz /usr/local/etc/mrtg
qmailmrtg7: /usr/local/etc/qmailmrtg*
php update:
mkdir -p /home/bup/update/php cp -rp /usr/local/etc/php /home/bup/update/php cp -p /usr/local/etc/php* /home/bup/update/php
qmail-ion-spamfilter upgrade:
- - Qmail patch-level
FreeBSD ports applied patches:
x x [X] QMAILQUEUE_PATCH run a QMAILQUEUE x x [X] BIG_TODO_PATCH enable big_todo x x [X] BIG_CONCURRENCY_PATCH use a concurrency x x [X] OUTGOINGIP_PATCH set the IP address x x [ ] QMTPC_PATCH send email using x x [ ] BLOCKEXEC_PATCH block many windows x x [ ] DISCBOUNCES_PATCH discard
x x [ ] LOCALTIME_PATCH emit dates in the x x [ ] MAILDIRQUOTA_PATCH Maildir++ support x x [ ] SPF_PATCH Implement SPF x x [ ] RCDLINK create
stock qmail upgrade: cd /usr/ports/mail/qmail make config Check if all clear. portupgrade -Rri qmail
isc-dhcp upgrade: mkdir -p /home/bup/update/isc-dhcp3 cp -p /usr/local/etc/dhcpd.conf /home/bup/update/isc-dhcp3/dhcpd.conf-date +%d%m%y cp -p /usr/local/etc/rc.d/isc-dhcpd.sh /home/bup/update/isc-dhcp3/isc-dhcpd.sh-date +%d%m%y
apache13 to apache2 upgrade:
build apache2 first and make backups of everything. Make sure your root stays: /home/apache make deinstall old apache, make install new apache Recompile all possible dependencies. (php and the like)
apache2 upgrade:
mkdir -p /home/bup/update/apache2 tar cfvpj /home/bup/update/apache2/home-apache-date +%d%m%y.tbz /home/apache /usr/local/www cp -p /usr/local/etc/rc.d/apache2.sh /home/bup/update/apache2/apache2.sh-date +%d%m%y
qmrtg upgrade:
